ATEX Gazpar connector: IoT sensor for pulse meter

Make your gas meters in ATEX zones communicate

Highlights of the IoT sensor

ATEX product: used in explosive atmosphere
- Gas & steam
  - Zone 1 : immediate proximity to the sensitive area
  - Groupe IIC : hydrogen gases and vapors, acetylene …
- Dust
  - Zone 21 : immediate proximity to the sensitive area
Already pre-wired to a GAZPAR connector
Periodic monitoring of fraud and leakage flows
Alert when thresholds are exceeded
Local or remote configuration
Battery-operated product
Data time-stamping (in LoRaWAN®)
Network test at startup (in LoRaWAN®)
Compatible with Kare+ (in LoRaWAN®)

Example of use case with the GAZPAR CONNECTOR:

SERVICES RELATED TO THE PRODUCT

FEATURES OF THE IOT SENSOR

Description

What actions are performed by the ATEX sensor?

MONITOR

Receive values of the indexes from gas meters,
Monitor over-consumption.

Alert

Monitor any leaks

What are the technical characteristics of the connected sensor?

Features

PULSE

Periodic modes with or without log
Data redundancy
Timestamp
Network test at startup
Personalisation of the joint phase
Configurable lifeframe
Alert concerning product, configuration error, low battery

Dimensions: 105 x 50 x 27 mm
Weight: 70 g
Casing: IP67 (IP68 on request)
Integrated fastening system: DIN rail, tube, wall mount, flange
Operating temperature range: -20°C to + 40°C
Soldered battery

Zone:
- Sigfox: RC1
- LoRaWAN®: EU863-870

Standards: Directive 2014/53/EU (RED)

GAZPAR CONNECTOR

2-point female connector
Cable length: 1m

ATEX specifications

ATEX II 2 G D
Ex ib IIC T4 Gb
Ex ib IIIC T135°C Db
-20°C < Tamb < +40°C
Uo ≤ 3.9V; Io ≤ 6.1mA; Po ≤ 6mW; Co ≤ 440µF; Lo ≤ 930mH
Ui ≤ 15V; Ii ≤ 1000mA; Pi ≤ 3750mW; Ci = 0µF; Li = 126nH