IoT ATEX sensor | GAZPAR connector: for gas meter

/ Adeunis sensors / ATEX Gazpar connector: IoT sensor for pulse meter

ATEX Gazpar connector: IoT sensor for pulse meter

Make your gas meters in ATEX zones communicate

Thanks to its pre-wired GAZPAR connector, this IoT sensor reads the consumption data from your gas meters to help you save energy.

It consists of an ATEX PULSE IoT sensor combined with a Gazpar connector.

Highlights OF THE IOT SENSOR

Already pre-wired to a GAZPAR connector
Periodic monitoring of fraud and leakage flows
Alert when thresholds are exceeded
Local or remote configuration
Battery-operated product
Data time-stamping
Network test at startup

ATEX product: used in an explosive atmosphere
- Gas & steam
  - Zone 1: immediate proximity to the sensitive area
  - Groupe IIC: hydrogen gases and vapors, acetylene …
- Dust
  - Zone 21: immediate proximity to the sensitive area

SERVICES RELATED TO THE PRODUCT

CHARACTERISTICS OF THE IOT PULSE ATEX SENSOR

What does the connected sensor do?

monitor

Periodically check gas meter readings:
- index transmission,
- flow monitoring (min/max)

Alerte

AND/OR Trigger an alarm when:

when the flow rate exceeds a threshold (high/low)
when a leak is detected

THIS SENSOR IS AVAILABLE IN GAS METER READY VERSIONS

FEATURES OF THE IOT SENSOR

Description

What are the technical characteristics of the connected sensor?

Sensor features

Periodic modes with or without history
Data redundancy
Configurable life frame
Time stamping (LoraWAN)
Network test on start-up (LoraWAN)
Customisation of the join phase
Alert on product error, configuration error, low battery
Inductance of the cable < 0,004 milliH (mH)
Cable capacity < 0,00012 microF (uF)

General specifications

Dimensions: 105 x 50 x 27 mm
Weight: 70 g
Casing: IP67
Integrated fastening system: DIN rail, tube, wall mount, flange
Operating temperature range: -20°C to + 40°C
Soldered battery

Gazpar connector

2-pin female connector
Cable length: 1m
Inductance of the cable < 0,004 milliH (mH)
Cable capacity < 0,00012 microF (uF)

PULSE ATEX Specifications

ATEX II 2 G D
Ex ib IIC T4 Gb
Ex ib IIIC T135°C Db
-20°C < Tamb < +40°C
Uo ≤ 3.9V; Io ≤ 6.1mA; Po ≤ 6mW; Co ≤ 440µF; Lo ≤ 930mH
Ui ≤ 15V; Ii ≤ 1000mA; Pi ≤ 3750mW; Ci = 0µF; Li = 126nH

Certifications:

LoRaWAN EU863-870

In what area does the IoT sensor operate?

Directive 2014/53/UE (RED)

What is the expected autonomy of the connected sensor?

1 index transmission per hour (24 frames/day), 500 pulses/day and pull-up enabled LoRaWan EU863-870 :

LoRaWAN EU863-870:

SF7 > 10 years
SF12: 7 years

To go further, all documents and tools related to the PULSE ATEX IoT sensor

User Guide PULSE ATEX LoRaWAN EU863-870

Release Note – PULSE ATEX APP FW 2.1.2

Technical Reference Manual PULSE ATEX

Installation Guide LoRaWAN IP67-IP68

Quick Start Guide Gazpar Connector

Datasheet

Datasheet_Gazpar_Pulse_Atex_en

Decoding

>CODEC

Questions about using the PULSE ATEX? Consult our dedicated FAQ

Previous versions: find all documentation related to previous versions of this sensor here:
For the LoRaWAN version, click here.
For the Sigfox version, click here.